Pillar Round IP65 Stainless Steel Outdoor Light GH98042V
Q1: Hi is this light ok to put into the ground around the edge of the drive and put led bulbs in.
A1: Yes, it will work just fine that way.
Q2: What is the cut out size?
A2: I have looked at the instructions sheet attached to the product information, and it shows an installation diagram which indicates 88mm cutout. Please click on the blue numbers to bring this up for you to refer to "25701
Q3: Can you please tell me what guarantee these lights have?
A3: This light has a 2 year guarantee
Q4: What size allen key is used to remove the four bolts holding down the stainless steel cap
A4: I unfortunately couldn't give a specific size for the allen key, it will however come with the correct allen key that it needed.
Q5: The photo shows a product with a cable coming out but the instructions don't show the cable. Does the product come with cable attached?
A5: Yes this light comes with the cable attached.
Q6: Can you replace bulbs in these units
A6: Yes you can, just by removing the screws at the top giving you access to the bulb
Pillar stainless steel outdoor recessed light.
The Pillar is circular-shaped with a clear glass lens, this clear lens allows the full brightness of the bulb to shine through.
This is a tough and durable mains voltage fitting built to last and is suitable for walkover applications.
Requires 1 x LED GU10 lamp that is not included.
Comes with 1 metre of cable attached.
This is part of the Pillar Walkover Range.
Class 1 Requires an Earth..
Finish: Stainless Steel.
Light Source: LED with a GU10 lamp holder. Fittings that are supplied with non-dimmable GU10 LED bulbs or those supplied without any GU10 bulbs can, in most instances, be made dimmable by installing a dimmable GU10 LED.
Dimming Info: Suitable for dimming when dimmable GU10 LED bulbs are used.
Warranty Period: Two Years.
IP Rating: IP65.
- Height: 150mm (5.91")
- Width: 105mm (4.13")
- Projection: 5mm (0.2")