Pillar Round IP65 Outdoor Light GH98042V

Product Questions
Q1: Hi is this light ok to put into the ground around the edge of the drive and put led bulbs in.
A1: Yes, it will work just fine that way.
Q2: What is the cut out size?
A2: I have looked at the instructions sheet attached to the product information, and it shows an installation diagram which indicates 88mm cutout. Please click on the blue numbers to bring this up for you to refer to "25701
Q3: Can you please tell me what guarantee these lights have?
A3: This light has a 2 year guarantee
Q4: What size allen key is used to remove the four bolts holding down the stainless steel cap
A4: I unfortunately couldn't give a specific size for the allen key, it will however come with the correct allen key that it needed.
Q5: The photo shows a product with a cable coming out but the instructions don't show the cable. Does the product come with cable attached?
A5: Yes this light comes with the cable attached.
Q6: Can you replace bulbs in these units
A6: Yes you can, just by removing the screws at the top giving you access to the bulb
Price Promise
Lowest Price Guaranteed2 In Stock
For Immediate DispatchFurther Availability
Normally Within 2 to 3 DaysConfirmed In Stock
With The Manufacturer
Pillar stainless steel outdoor recessed light.
The Pillar is circular shaped with a clear glass lens, this clear lens allows the full brightness of the bulb to shine through.
This is a tough and durable mains voltage fitting built to last and is suitable for walkover applications.
Requires 1 x 50watt GU10 lamp that is not included.
This is part of the Pillar Walkover Range.
Data Sheets:
gh98042v-mounting-instructions
Class 1 Requires an Earth..
Finish: Stainless Steel.
Light Source: GU10 Mains Voltage Halogen.
Alternative Light Source: Retrofit LED Bulbs are also available.
Dimming Info: Suitable for dimming with a standard dimmer switch. (A high quality switch is recommended).
Warranty Period: Two Years.
IP Rating: IP65.
Weight: 700g.
Size:- Height: 150mm (5.91")
- Width: 105mm (4.13")
- Projection: 5mm (0.2")



