Steinel Dusk Till Dawn Nightmatic 2000 White (550417)
Q1: How easy is it to fit this unit
A1: If you are replacing an existing switch then it should be very easy for somebody with basic electrical knowledge, for an electrician is will be no problem, even if it's part of a new install. However, we always recommend the use of a qualified electrician for all electrical installations.
Q2: Can this be overridden by the light switch? So it would come on whilst we are out, But if we switch the light off when we went to bed, It would all go out? Just wouldn't want it on overnight.
A2: Unfortunately not as that defeats the object of a dusk till dawn sensor. By the sounds of it you require a light fitting with a PIR sensor with a manual override feature.
Q3: Does this switch have a minimum load requirement? Would it work with a 5 watt led light?
A3: The NightMatic 2000 has no minimum load
- Price Promise
Lowest Price Guaranteed
- 4 In Stock
For Immediate Dispatch
- Further Availability
Normally Within 7 Days
- Confirmed In Stock
With The Manufacturer
Nightmatic dusk till dawn sensor finished in white.
The Nightmatic controller detects ambient brightness, automatically switching connected lights "ON" when light levels fall to twilight threshold and "OFF" again at dawn.
Time and twilight threshold can be adjusted to any chosen setting.
Made from UV-resistant plastic with a white finish.
Maximum load 1000w (Incandescent) maximum load 500w (Low Energy), it has no minimum load.
Response brightness 2-10 lux.
This is part of the Nightmatic Range.
nightmatic 2000 white data sheet
Class 2 Double Insulated. No Earth Required..
Dimming Info: Not Suitable For Dimming.
Warranty Period: Three Years.
IP Rating: IP54.Size:
- Height: 99mm
- Width: 74mm
- Projection: 37mm