Halton PIR Solar Powered Photocell Floor Post 96926
Ask A Product Question
If you have a question about this product then please submit it below, we aim to respond within 20 minutes during office hours. Don't worry though, we'll only email in response to your question, we don't send spam or pass your details on to any third parties.
- Price Promise
Lowest Price Guaranteed
Normally Within 2 to 3 Days
- Confirmed In Stock
With The Manufacturer
Halton outside PIR photocell floor post, brushed stainless steel finish.
An exterior solar powered post light with PIR and photocell, this has a stainless steel round floor mounting plate with a main matching tubular shaped body which leads up to the tiered shaped light head with a white polycarbonate diffuser.
Runs with 5.8w integrated LED 3000k warm white and gives out 310 lumens.
This has an on/off push switch which activates non-motion and motion and is complete with integrated control gear.
This has 110 ° detection angle, 8m maximum range.
This has great flexibility with the control of light levels by selecting one of the modes.
Press and hold the switch for 3 seconds to turn on, the product will stay on at 30Lm.
After mode 1, press the switch to change to mode 2.
Product will stay on at 30Lm and increase to 130Lm when motion is detected (This will stay at 130Lm for 25 seconds then dim to 30Lm and stay lit).
After mode 2, press the switch to change to mode 3.
Product will be 310Lm when motion is detected and will turn off after 25 seconds. Press and hold the switch for 3 seconds to turn it off.
This is part of the Halton Outdoor Range.
Class 3 SELV (Separated or Safety Extra-Low Voltage) power source..
Finish: Stainless Steel.
Light Source: LED.
Dimming Info: Not Suitable For Dimming.
Warranty Period: Two Years.
IP Rating: IP44.
- Height: 500mm (19.69")
- Width: 147mm (5.79")