White Alabaster Glass Shade Ctag001
Q1: Is this a heavythick glass, Thank you.
A1: Yes, this is heavy duty, thick glass.
Q2: Can this take a 100 watt bulb
A2: No, 60 watt Max providing your lamp holder is capable of 60 watts. Some lamp holders will be rated at 40w.
Q3: Can this shade be fitted using a screw tight type holder rather than a spring clip
A3: Unfortunately, the hole type is to large to be able to use a screw type shade retaining ring. it will need to be held in by a spring clip fitting.
Q4: Would these be suitable as replacement shades for existing wall and ceiling fittings with a spring clip to secure them
A4: yes they would be OK to use as a replacement
Q5: You say the entry hole is 40mm. Is this the inside or outside of the hole
A5: The 40mm diameter refers to the diameter of the hole which allows the shade to sit over the lamp holder and the measurements are from the inner circle.
Q6: Size of hole for the cable / post?
A6: The hole is approximately 40mm.
is the glass frosted? We have bought the bulbs which are low energy led bulbs. 4w equivalent to 25w. We would be happy if we weren't able to see the bulb through the shade.
A7: This shade is alabaster, which is the marble effect glass. It is opaque so you shouldnt see the bulb through it.
Q8: Can this be used the other way up? Our shade broke on a wall light that hangs down.
A8: I can't see any reason why the shade can't be used anyway up
Q9: Tsmaller shade looks quite big and the spring clip to reduce the diameter is difficult to understand. Any model with a smaller side branch shade. Thank you
A9: Unfortunately not I am afraid, this is the only size we do.
Q10: What are dimensions in inches ?
A10: Width is 4.17 inches and height is 3.9 inches.
- Price Promise
Lowest Price Guaranteed
- On Display
In The Lighting Showroom
- 29 In Stock
For Immediate Dispatch
- Further Availability
Out Of Stock Permanently
Beautiful, single white glass shade with an alabaster effect pattern.
This heavy duty, thick glass can be used on a wide range of light fittings to add style and beauty to an existing fitting.
The glass shade will diffuse the light and cut down the glare emitted from the lamps to help give a soft, warm white glow.
This shade has a 40mm hole diameter and can be used on fittings with a spring clip.
The glass can be used with a 60w maximum incandescent lamp.
You must not exceed the maximum wattage as this can crack the glass.
Higher brightness can be achieved by using low energy or LED lamps.
- Height: 100mm
- Width: 160mm