Lonstrup 22 outdoor PIR light 71432031
Q1: Once the manual function is activated, Is it possible to put it back to sensor activation at any time or do you have to wait 5hours?
A1: Yes, if you switch the light off for a few seconds it will reset the manual override and return the sensor to its normal state
Q2: Because of the porch roof i cannot assemble as it is.
is it ok for it to be erected upside down
A2: No unfortunately not, it has been designed for upright fitting only.
Q3: Can the direction in which the detector faces be changed: The entry to the garden for which i want to use the lamp is at right angle to the light.
A3: The sensor lens is fixed in that position, so is unable to be changed.
- Price Promise
Lowest Price Guaranteed
- 3 In Stock
For Immediate Dispatch
- Further Availability
Normally Within 10 Days
- Confirmed In Stock
With The Manufacturer
Lonstrup IP44 Rated outdoor wall light with a built-in PIR sensor.
Manufactured from galvanised steel with a clear glass diffuser.
This fitting offers a 15 year manufacturer guarantee against corrosion.
Requires 1 x 60 watt E27 lamp (Not Included).
It comes with a manual override, which is operated by switching the light off/on and off/on again.
It will then turn the light on for 5 hours before reverting back to its standard setting.
It has a detection range of up to 8 meters.
This is part of the Lonstrup Range.
Class 1 Requires an Earth..
Light Source: ES-E27 Incandescent.
Alternative Light Source: Retrofit LED Bulbs are also available.
Dimming Info: Not Suitable For Dimming.
IP Rating: IP44.Size:
- Height: 265mm (10.43")
- Width: 220mm (8.66")
- Projection: 270mm (10.63")