Bathroom Polished Chrome Wall Light 4337-1-LED
Q1: Can the pull switch be removed and this used with a wall switch?
A1: Yes, you can put the switch in the on position and remove the chain. Removal of then entire switch might compromise the light's ability to prevent water ingress though, which could be an issue when used in a bathroom.
Q2: Could this be fitted upside down?
A2: No, the light is designed to dissipate the heat through the top of the glass, also the clips that retain the glass may not be adequate to hold it upside down and finally the pull cord would foul the light.
Q3: Size info is not clear. Can you confirm the size of the glass shade? It's diameter and height.
A3: The shade height is 95mm and the width is also 95mm according to the supplier
- Price Promise
Lowest Price Guaranteed
Normally Within 4 Days
- Confirmed In Stock
With The Manufacturer
Single LED bathroom wall light finished in chrome.
This bathroom light has a round wall bracket, there is a think arm that comes out of this and joins to an upright that has the white glass ball shade on the top, there is a pull cord on/off switch located on the wall bracket for easy operation.
The fitting is supplied with 1 x 2.5w G9 LED lamps with a light output of 200 lumens and a 3000k warm white colour temperature.
Class 1 Requires an Earth..
Light Source: LED.
Dimming Info: Not Suitable For Dimming.
Warranty Period: One Year.
IP Rating: IP44.Size:
- Height: 210mm (8.27")
- Width: 100mm (3.94")