Outdoor Tilt And Twist PIR Sensor In Black 67346
Q1: Could you confirm that this pir will operate an led floodlight, What the max led wattage can be and also not cause the led to blink when in off status due to the effect of capacitance, As is normal when using most pir's in this way.
A1: Yes this PIR should operate an LED floodlight as long as the maximum load of 1000 watts is not reached. In regards to blinking when of this sensor shouldn't do.
Q2: Can this sensor be switched to being on constant without requiring a separate by-pass switch?
A2: No this sensor does not have the required function. You need a sensor with a manual override. These can be found on this page: - Search.Aspx?Search=Manual+Override&Submit=Search
- Price Promise
Lowest Price Guaranteed
Normally Within 4 Days
- Confirmed In Stock
With The Manufacturer
A smart looking PIR sensor that comes with all the fixings that are required.
It is constructed from ABS plastic which is strong and robust with a matt black finish that should easily blend with the outside area that is placed in.
Can be used with either an LED or old style bulbs, and multiple lights as long as the maximum load of 1000 watts is not reached.
The PIR sensor has a detective range of up to 12m and a detection angle of 180 °.
Also has a timer function that can be set from between 10 seconds and 4 minutes.
Comes with a manufacturers warranty of 2 years.
67346 PIR SENSOR
Ingress Protection Rating: IP44.Size:
- Height: 92mm
- Width: 65mm
- Projection: 100mm