01225 704442
Classic V-Pro Rotary Low Load Dimmer Switch JRP401
Product Questions
Q1: I need a dimmer for 5 leds (that are of 4w each)
however i need one that is shallow in depth - to fit into a standard light switch box that it cut into the wall - i can’t fit a deeper box
A1: The recommended back box depth for the JRP401: 25mm. This is a standard size so should be fine for you. The depth of the mounting face in to the box is 18.1mm
Price Promise
Lowest Price Guaranteed
Availability
Normally Within 2 to 3 Days
V-Pro series classic low load dimmer switch finished in pewter.
This switch is a 1-gang 2-Way push-On/Off rotary LED dimmer switch.
The maximum load for this dimmer is dependant on the lamps used, LED 0 - 100 watt maximum, GLS 0 - 400 watt maximum and halogen: 0 - 300 watt.
The face plate has gentle bevelled edging with a raised finish.
The dimmer has soft start technology, which helps prolong the life span of the bulbs.
V-Pro dimmers are not suitable for wire-wound "toroidal" transformers.
Depth from Mounting Face: 18.1mm.
The recommended back box depth: 25mm
This is part of the Low Load Dimmers Range.
Class 1 Requires an Earth..
Finish: Pewter.
Warranty Period: Ten Years.
Size:- Height: 91mm (3.58")
- Width: 91mm (3.58")
- Projection: 8mm (0.31")
