Inigo Steel LED Flush Ceiling Fitting 8256-55

Ask A Product Question
If you have a question about this product then please submit it below, we aim to respond within 20 minutes during office hours. Don't worry though, we'll only email in response to your question, we don't send spam or pass your details on to any third parties.
Price Promise
Lowest Price GuaranteedFree Delivery
On This Product TodayAvailability
Normally Within 3 Weeks
Inigo LED flush ceiling fitting, steel finished.
This ceiling fitting is produced with a square-shaped ceiling plate, which holds three rectangular frames that have a built-in LED.
Runs with 3 x 16 watt built-in LED with a light output of 3000k (warm white) and a light output of 5760 lumens.
This runs with a total of 55 watts with an effective light output 3000 lumens.
This can be dimmed by using your existing on/off light switch, if you flick the light off then on again within 3 seconds the lights start to dim down, when at the preferred brightness simply switch the light off, then back on after 3 seconds, and the light will stay at the set light level.
Data Sheets:
8256-55
Class 1 Requires an Earth..
Finish: Stainless Steel.
Light Source: Dimmable LED.
Dimming Info: Controlled by a built in dimmer. N.B. Must not be used with a secondary dimmer switch.
Warranty Period: Five Years.
IP Rating: IP20.
Size:- Height: 70mm (2.76")
- Width: 750mm (29.53")
- Depth: 750mm (29.53")




