Halton Solar Powered PIR Photocell Bollard 96927
Ask A Product Question
If you have a question about this product then please submit it below, we aim to respond within 20 minutes during office hours. Don't worry though, we'll only email in response to your question, we don't send spam or pass your details on to any third parties.
- Price Promise
Lowest Price Guaranteed
Normally Within 2 to 3 Days
- Confirmed In Stock
With The Manufacturer
Halton IP44 exterior photocell PIR bollard light, brushed stainless steel finish.
A solar powered bollard with photocell and PIR, this has a circualr floor mounting plate with a tall tubular shaped body and attached to the body is a tiered shaped light head with a white polycarbonate diffuser.
Complete with an on/off push switch which activates non-motion and motion and is also complete with integrated control gear.
This has 110 ° detection angle, 8m maximum range.
Runs with 5.8w integrated LED 3000k warm white and produces 310 lumens.
This product has flexibility with the control of light levels by selecting one of the modes.
Press and hold the switch for 3 seconds to turn on, the product will stay on at 30Lm.
After mode 1, press the switch to change to mode 2.
Product will stay on at 30Lm and increase to 130Lm when motion is detected (This will stay at 130Lm for 25 seconds then dim to 30Lm and stay lit).
After mode 2, press the switch to change to mode 3.
Product will be 310Lm when motion is detected and will turn off after 25 seconds. Press and hold the switch for 3 seconds to turn it off.
This is part of the Halton Outdoor Range.
Class 3 SELV (Separated or Safety Extra-Low Voltage) power source..
Finish: Stainless Steel.
Light Source: LED.
Dimming Info: Not Suitable For Dimming.
Warranty Period: Two Years.
IP Rating: IP44.
- Height: 800mm (31.5")
- Width: 147mm (5.79")