Sidney Outdoor Sensor Light 87105
Product Questions
Q1: On your data sheet it shows the light fixed at a height of 1.9m max height? We want to set it at 2.6m is this possible?
A1: This is possible but it will reduce the detection range of the sensor
Q2: Can you fit the light at 3.5 m high
A2: We recommend fitting the light at a maximum of around 2.5 meters as the detection is less effective the higher you go and can't guarantee it would work
Q3: Can the pir sensor range be reduced eg data sheet states 2m - 8m so can that be adjusted to 2m - 4m?
A3: Yes, the PIR sensor range can be reduced down from anything between 8m and 2m.
Q4: Does this light have manual override?
A4: No, there is no manual override, but your electrician might be able to wire in an additional switched live that could override the sensor
- Price Promise
Lowest Price Guaranteed - Free Delivery
On This Product Today - 5 In Stock
For Immediate Dispatch - Further Availability
Normally Within 10 Days
Stainless steel finished Sidney outdoor light with PIR sensor.
Attached to the round wall bracket is a thin swan neck arm with a PIR sensor located at the bottom, attached to the other end is a domed frame and a frosted shade beneath.
The sensor has a detection angle of 120 °, a 6 metre range, and a time setting from 5 seconds to 8 minutes.
Requires 1 x LED E27 ES bulb that is not included.
This is part of the Sidney Range.
Data Sheets:
87105-mounting-instructions
87105-data-sheet
Class 1 Requires an Earth..
Finish: Stainless Steel.
Light Source: ES-E27 Incandescent or LED.
Alternative Light Source: Retrofit LED Bulbs are also available.
Dimming Info: Not Suitable For Dimming.
Warranty Period: Three Years.
IP Rating: IP44.
Weight: 1.78kg.
Size:- Height: 375mm (14.76")
- Width: 275mm (10.83")
- Projection: 325mm (12.8")