21262134 Tin Stainless Steel outoor Sensor Wall Light
Ask A Product Question
If you have a question about this product then please submit it below, we aim to respond within 20 minutes during office hours. Don't worry though, we'll only email in response to your question, we don't send spam or pass your details on to any third parties.
Normally Within 7 Days
Tin outdoor sensor wall light is made from and finished in stainless steel.
The sensors time can be adjusted from 10 seconds to 5 minutes and the light sensitivity can also be changed.
This has a 110 degree detection angle and detects movement from 5 metres from the front and 4 metres at the side.
The backplate is rectangular shaped and has a tubular fixed frame.
Inside the fitting is a single lamp-holder that requires a 35watt maximum GU10 bulb that is not included.
N.B. From September 2016, All light fittings that have a GU10 lamp holder will not be automatically supplied with halogen bulbs. However, there may be a small amount of residual stock left over which still have the free of charge halogen bulbs included.
This is part of the Tin Range.
Class 1 Requires an Earth.
Finish: Stainless Steel
Light Source: GU10 Mains Voltage Halogen.
Alternative Light Source: Retrofit LED Bulbs are also available.
Dimming Info: Suitable for dimming with a standard dimmer switch. (A high quality switch is recommended).
Ingress Protection Rating: IP44Size:
- Height: 162mm
- Projection: 115mm